alt="Adcole 1310 gage that shows a high speed camshaft manufacturing application"
Overview

The Adcole Model 1310 gage is designed for fully automated, high speed camshaft manufacturing operations. Offering sub-micron accuracy, the 1310 can easily monitor (in real-time) the machining process of up to 200 parts per hour.

Rapid camshaft measurement cycle times of <20 seconds — depending on part requirements — ensures optimal manufacturing quality and throughput levels. The gage provides 3600 data points per revolution per follower, enables part capacities of up to 609 mm (24″, with optional capacities available). This flexible gage offers 100 mm (3.9″) of headstock travel, a tailstock assembly that offers a travel range of 150 mm (5.9″ with optional range of 300 mm [11.8″] available).

Adcole Industries
Industries
  • Automotive
Adcole Gage Types
Gage Type
  • Crankshaft & Camshaft Measuring Gage
  • High Precision Gage
  • In-Line Gage
  • Robot Loaded & Fully Automated Gage
  • Horizontally Loaded Gages
  • Custom Gages
Adcole Components
Components It Measures
  • Camshafts
Adcole Parameters
Parameters It Measures
  • Diameter
  • Length
  • Profile
  • Straightness
  • Roundness (Circularity)
  • Angularity
  • Runout
  • Concentricity
  • Flatness
  • Cylindricity
  • Perpendicularity
  • Parallelism
  • True Position
  • Chatter
  • Taper
  • Center Deviation
  • Cam Lobe Lift Error
Adcole Model 1310: High-Speed In-Line Measuring Gage
Features & Benefits
  • Measures up to 609 mm (24″) length parts (with optional part lengths available)
  • Offers a deep set of camshaft measurement parameters, containing lobes, journals, and timing references
  • Provides menu-driven software for easy gage operation
  • Affords a programmable parts elevator for accurate load and unload of parts into the gage
  • Engineered for shop floor conditions
  • Available in robot, gantry or manual load by operator configurations
  • Enables high volume inspection capacity of up to 200 parts per hour
  • Collects 3,600 data points per revolution per follower
  • Affords camshaft measuring times of <20 seconds, depending on part requirements (not including load and unload time)
  • Provides easy maintenance via modular gage design
  • Permits easy part changeovers using a simple follower relocation system
S A L E S

[email protected]

S E R V I C E

[email protected]

G E N E R A L

[email protected]

C A L L

508 485 9100