Model 1100

Model 1100 Crankshaft/Camshaft Gage

The Adcole Model 1100 is a Cylindrical Coordinate Measurement Machine designed to measure cylindrical engine components such as camshafts, crankshafts and pistons and high speed and with high accuracy. The economical gaging system handles a wide variety of part lengths and configurations. The rugged gage can be located in a controlled environment or out on the shop floor. This fast, versatile and accurate gage employs the latest technology in motion controls, signal processing and linear grating technology.

Model 1100

THIS GAGE IS USED FOR

  • Crankshaft measurements up to 48″ (1219 mm) maximum length and 6.75″ (171 mm) stroke
  • Camshaft journals and cam lobe rise measurement
  • Pistons
  • Other types of shafts

KEY APPLICATIONS

  • Verify grinders, milling machines and polishers
  • Control the manufacturing process with closed loop communications
  • Check finished parts or early operations for material distribution
  • Make fast accurate checks after changing a grinding wheel or machine conversion
  • Minimize and control early part failure and warranties

The Model 1100 gage allows efficient processing of measurement data. Chatter mark analysis or SPC data evaluation and archiving can be performed without interrupting the measuring process.

 

Measured results are displayed on the control screen and can be printed or plotted in a customized, easy to interpret report or output as a file to a network PC. The part tolerance check automatically determines all tolerance deviations of the part and shows the result as GO or NOGO.

 

The Model 1100 gage is built vertically for optimal measuring results and safe part handling. Adcole gages are designed to meet the demands of production lines.

Features at a Glance

  • Precision flat granite surface plate extending the entire length
  • Precision heavy-duty spindle bearing
  • Easy-to-use software with Windows interface
  • Fully programmable follower, carriage, and headstock speeds
  • Output options include on-screen results, printed or exported to SPC
  • Fast adjustments of tailstock to accommodate different length parts
  • Submicron accuracy and repeatability
  • Measurement speeds up to 15 parts per hour

Measured Parameters

  • Roundness (LSC, MIC, MCC, MZC)
  • Diameter (LSC, 2-point)
  • Surface Chatter
  • Radius
  • Taper
  • Eccentricity
  • Lift and Lift Error
  • Base Circle Radius
  • Velocity
  • Acceleration
  • Axial Length/Spacing

  • Cylindricity
  • Runout (axial, radial)
  • Concentricity
  • Center Deviation
  • Lobing
  • Perpendicularity
  • Index Angle
  • Throw/Stroke
  • True Position
  • Straightness
  • Flatness